Steps to move a grand piano

Pianos routinely make movers yearly list of items that are most frequently damaged. Grand pianos are particularly bothersome. Practicing the following treatments for disassembling, cushioning and loading grand pianos will prevent damage, lower claims expenditure, and improve consumer complete satisfaction.

1) At least 3 people are needed to manage a baby grand piano. If the child grand piano needs to go up or down stairs or if a complete or concert grand piano requires to be transferred, a minimum of 4 individuals are needed.

2) Constantly complete a thorough and precise inventory. It might be more suitable or essential to use a visual inventory to sufficiently explain and reveal pre-existing damage.

3) As various parts are dismantled, please location all hardware in a properly labeled parts bag and then put the parts bag in a "Parts Box".

4) Eliminate the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a tidy furnishings pad.

5) Disconnect the lid by getting rid of the hinge pins. Wrap the cover in a clean furnishings pad.

6) Get rid of the prop that holds the lid open and cover it in a tidy furniture pad. The prop has a hinge pin and remains in 2 pieces.

7) Get rid of the pedal assembly and wrap it in a clean furnishings pad. When removing the screws, please be cautious not to drop the braces. As you face the piano, number the push-rods from left to right as "1", "2", and "3", by putting a piece of masking tape with the proper number on each rod.

8) Pad the piano by placing a tidy rolled furnishings pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to prevent it from tumbling open while you handle the piano. Cover the top of the piano with 2 clean furniture pads, nicely folded around the keyboard. Usage elastic band to protect the pads. Keep in mind: Please ensure that the surface of the piano is dust-free before padding it. Padding a highly refined surface area that is dirty might trigger great scratches, especially on a black lacquer finish.

9) Position a piano board and attach the straps so that it is ready to get the piano. The raised brace on the piano board ought to be at the keyboard end of the piano.

10) Eliminate the left front leg by positioning one person underneath the piano at the left end of the keyboard. The other 2 individuals must support the left front corner. The person underneath the piano must turn the maintaining block so that the long end points far from the leg. The screws, if there are any, ought to then be removed. The "below" individual ought to then extricate the piano prior to really getting rid of the leg. Make certain to have two people raising the corner of the piano while the third individual eliminates the leg. Keep in mind: Please make sure to note which legs were eliminated from which positions because some pianos have legs that are not interchangeable.

11) Location the piano on the piano board by decreasing the "leg-less" end onto the board. Please be sure to lift the entire piano somewhat while finishing this maneuver to avoid undue pressure on the remaining, connected legs check over here as the piano ideas. Be sure that the piano is centered snugly versus the brace at the end of the piano board.

12) Eliminate the 2 remaining legs and cover them in clean furniture pads. These legs are held in location by a "crucial and slot" plan. To eliminate the leg, slide it inward toward the center of the piano till it comes out of the slot.

13) Protect the piano to the piano board by bringing completions of the straps together and attaching them. Location folded burlap pads over the furniture pads however under the straps to offer additional protection to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, tie the loose ends of the 2 straps together.

14) To move the piano over a flat, level surface, tilt the piano and piano board and place a four-wheel dolly under the center of the piano board.

15) To move the piano up or down stairs, utilize the piano board as a skid. After sufficiently padding the stairs for protection versus residence damage, position the keyboard end of the piano toward the bottom of the stairs. Connect a hump strap to the top end of the piano board to avoid the piano from slipping.

16) To load the piano, leave it on the piano board and location it in a tier as the first base product with the keyboard dealing with the wall of the preceding tier. The best location to load the cushioned lid is in between the piano and the preceding tier or between the wall and the piano.

Grand pianos represent a considerable obstacle, they can be moved without damage by using typical sense and practicing the treatments listed above.

Leave a Reply

Your email address will not be published. Required fields are marked *